ENEOS Products back to products

ENEOS 5W-20

GF- 5 OVERVIEW

The new ILSAC GF-5 specification is an improvement in engine oil performance compared to the current GF-4 specification. The new ENEOS GF-5 oil provides better fuel economy, increased emission system durability, enhanced piston cleanliness, reduced engine sludge, and improved turbocharger protection.

SPECIAL FEATURES

  1. Excellent Engine Cleanliness and Wear Resistance
    ENEOS Motor Oil 5W20's excellent engine cleanliness and wear resistance have been proven in official laboratory tests in the United States. This performance has also been confirmed in a full range of vehicle tests.
  2. Minimized Oil Consumption
    The consumption of motor oils depends largely on the type of base oil. Because ENEOS Motor Oil 5W20 is blended from high-performance base oils, it has minimized oil consumption when compared to a 5W30, so users can look forward to adding lessoil to their engines.
  3. Meets Latest API Standards
    The high-performance ENEOS Motor Oil 5W20 has been certified as meeting the latest API SN standard established by the American Petroleum Institute.

APPLICATION

Motor oil for gasoline engines.

APPLICABLE VEHICLES

Automobiles for which 5W-20 oils are recommended.

Caution: The use of this oil in automobiles designed for high-viscosity oils can result in inadequate oil circulation, oil leaks, and other problems.

CONTAINERS

1 US QT and 1 US Gallon

Typical Properties of ENEOS Motor Oil

Quality grade API SN/RC ILSAC GF-5
SAE viscosity grade 5W-20
Density (15°C) g/cm3 0.850
Flash point (COC) °C 240
Kinematic viscosity
   (40°C) mm2/s 44.20
   (100°C) mm2/s 8.21
Viscosity index 163
CCS Viscosity mPa's 3800 (-30°C)
Pour point °C -45
Acid Number mgKOH/g 1.88
Base Number (HCIO4) mgKOH/g 7.74
Color (ASTM) L3.0
HTHS Viscosity (150°C) mPa's 2.58

Note: The typical properties may be changed without notice. (January 2011)

Follow these precautions when handling this product:

Handling Precautions
  • Draining oil from a hot transmission can cause burns. Drain oil only after the transmission has cooled.
  • Inflammation can occur if oil enters the eyes. When handling this oil, wear protective goggles or take other measures to prevent eye contact.
  • Inflammation can occur if oil comes into contact with skin. When handling this oil, wear protective gloves or take other measures to prevent skin contact.
  • Do not drink this oil. (Swallowing this oil can cause diarrhea and nausea.)
  • Keep out of reach of children.
  • Read the Material Safety Data Sheet (MSDS) for this product before using the product. Obtain the Material Safety Data Sheet from where you purchased the product.
  • First Aid
  • In case of eye contact, rinse eyes thoroughly with clean water and consult with a physician.
  • In case of skin contact, wash skin thoroughly with soap and water.
  • If this oil is swallowed, do not induce vomiting. Consult with a physician immediately.
  • Disposal of Used Oil and Containers
  • Do not apply pressure to empty containers. The containers may burst if pressure is applied.
  • Do not weld, heat, drill, or cut the containers. The remaining oil may ignite and the containers may explode.
  • Follow all applicable laws and regulations when disposing of used oil or containers. If you are unsure of the proper disposal methods, consult first with the seller of the oil.
  • Storage Method
  • Seal the container tightly after use in order to prevent dirt, moisture, etc., from entering the oil. Store in a dark location. Avoid direct sunlight.
  • PL-5
  • AUT-0050-041
  • JX Nippon Oil & Energy Global

    © 2011 JX Nippon Oil & Energy USA, Inc.